Model Number : NI-AUV
HSN CODE : 84192010

Vertical Autoclave widely used in Microbiology, Medicine, Waste treatment, Pharma QC / QA / R & D and all applications requiring sterilization.
Double walled construction with Inner chamber (boiler) made of Stainless Steel 16 SWG sheet – 304 grade and Outer shell of Stainless-Steel sheet – 304 grade, mirror polish.
The Boiler and outer shell is provided with air insulation.
Lid is made of die pressed Thick Stainless-Steel plate & is equipped with Pressure gauge, Steam release/Exhaust valve & spring-loaded safety valves & ¼” BSP Port fitted with coupling for validation purpose.
Foot lifting arrangement for the lid.
Fully Argon welded to avoid steam and pressure leakage.
Heavy duty industrial flange heaters.
Full sterilization cycle including Air purging, Sterilizing hold time, Cycle end with release/exhaust of pressure & alarm is automatic.
Microprocessor based Controller with time and temperature programmable by user.
Timer Range: 1-99 Minutes.
Temperature Sensor: PT-100.
Low water level alarm with heater cut off.
Perforated basket made of Stainless-Steel sheet – 304 grades.
Operates on 230 Volts AC Single phase 50 Hz.

Temperature Range: 121°C to 125°C
Temperature Resolution: 0.1°C
Pressure Range: 15 PSI to 20 PSI (Factory Set at 15 PSI)

Model Number : NI-AUV
HSN CODE : 84191920

Triple walled in construction with Inner made of Stainless Steel – 304 Grade & Exterior of CRCA steel with powder coat finish.
Interior made of Stainless Steel – 316 grade and Exterior of Stainless Steel 304 grade matt finish in all GMP MODELS.
Food grade Silicon Rubber gasket which acts as a perfect sealant.
A transparent full-length Acrylic inner door is provided to have a clear inner view of the samples/specimens put in, without disturbing the Thermal Conditions inside the incubator.
Heating elements are made of high-grade Nichrome wire and placed at the both sides.
Temperature controlled by Dual Display Microprocessor based PID Temperature Controller & PT-100 sensor.
Air circulation by motorized blower placed on top of the incubator.
Available with removable S.S. Rod shelves.
Temperature Range: 5°C above ambient to 60°C.
Temperature Accuracy: ± 1°C or better.
Temperature Uniformity: ± 1°C or better.
Operates on 230 Volts AC Single phase 50 Hz.

Safety Feature: Capillary type Thermostat provided to take care of temperature overshoots & in case the PID Controlling system fails.

OPTIONAL ACCESSORIES:

A. Digital Timer with Temp. Controller of 999 minutes: Rs. 4000/-
B. PC/Printer Interface: RS 232 or 485 PC interface.

ELECTRIC BUNSEN BURNER

Electric Bunsen Burners are designed & used for evaporation of solutions in China Dish & can be used for any routine heating application in the laboratory.
Heating element is fixed within the conically shaped refractory cup.
Cup is enclosed in a stainless-steel casing and well insulated.
S.S. casing is mounted on a stainless-steel body with perforations to prevent temperature rise.
Temp. Controlled by Energy regulator.
Operates on 230 Volts AC Single phase 50 Hz.

NOTE :

MODEL	RATING	MAXIMUM TEMPERATURE
NI-BNB-01	300 W	700°C

Bacteriological Incubator